5.7.2. Setarea de Valori Implicite Globale pentru Operaţiuni

To set a default value for a operation option, simply add it to the op_defaults section with crm_attribute. Thus,

# crm_attribute --type op_defaults --attr-name timeout --attr-value 20s

would default each operation’s timeout to 20 seconds. If an operation’s definition also includes a value for timeout, then that value would be used instead (for that operation only).

5.7.2.1. Când Resursele Durează Mult Timp să Pornească/Oprească

There are a number of implicit operations that the cluster will always perform - start, stop and a non-recurring monitor operation (used at startup to check the resource isn’t already active). If one of these is taking too long, then you can create an entry for them and simply specify a new value.

Exemplu 5.7. O resursă OCF cu intervale customizate pentru acţiunile implicite ale acesteia

<primitive id="Public-IP" class="ocf" type="IPaddr" provider="heartbeat">
  <operations>
     <op id="public-ip-startup" name="monitor" interval="0" timeout="90s"/>
     <op id="public-ip-start" name="start" interval="0" timeout="180s"/>
     <op id="public-ip-stop" name="stop" interval="0" timeout="15min"/>
  </operations>
  <instance_attributes id="params-public-ip">
     <nvpair id="public-ip-addr" name="ip" value="1.2.3.4"/>
  </instance_attributes>
</primitive>