Product SiteDocumentation Site

9.4. Exemplu

Assuming we have an chassis containing four nodes and an IPMI device active on 10.0.0.1, then we would chose the fence_ipmilan driver in step 2 and obtain the following list of parameters
Obţinerea unei liste de Parametri STONITH
# stonith_admin --metadata -a fence_ipmilan
<?xml version="1.0" ?>
<resource-agent name="fence_ipmilan" shortdesc="Fence agent for IPMI over LAN">
<longdesc>
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/).

To use fence_ipmilan with HP iLO 3 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 seconds (power_wait=4 / -T 4)</longdesc>
<parameters>
        <parameter name="auth" unique="1">
                <getopt mixed="-A" />
                <content type="string" />
                <shortdesc>IPMI Lan Auth type (md5, password, or none)</shortdesc>
        </parameter>
        <parameter name="ipaddr" unique="1">
                <getopt mixed="-a" />
                <content type="string" />
                <shortdesc>IPMI Lan IP to talk to</shortdesc>
        </parameter>
        <parameter name="passwd" unique="1">
                <getopt mixed="-p" />
                <content type="string" />
                <shortdesc>Password (if required) to control power on IPMI device</shortdesc>
        </parameter>
        <parameter name="passwd_script" unique="1">
                <getopt mixed="-S" />
                <content type="string" />
                <shortdesc>Script to retrieve password (if required)</shortdesc>
        </parameter>
        <parameter name="lanplus" unique="1">
                <getopt mixed="-P" />
                <content type="boolean" />
                <shortdesc>Use Lanplus</shortdesc>
        </parameter>
        <parameter name="login" unique="1">
                <getopt mixed="-l" />
                <content type="string" />
                <shortdesc>Username/Login (if required) to control power on IPMI device</shortdesc>
        </parameter>
        <parameter name="action" unique="1">
                <getopt mixed="-o" />
                <content type="string" default="reboot"/>
                <shortdesc>Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata</shortdesc>
        </parameter>
        <parameter name="timeout" unique="1">
                <getopt mixed="-t" />
                <content type="string" />
                <shortdesc>Timeout (sec) for IPMI operation</shortdesc>
        </parameter>
        <parameter name="cipher" unique="1">
                <getopt mixed="-C" />
                <content type="string" />
                <shortdesc>Ciphersuite to use (same as ipmitool -C parameter)</shortdesc>
        </parameter>
        <parameter name="method" unique="1">
                <getopt mixed="-M" />
                <content type="string" default="onoff"/>
                <shortdesc>Method to fence (onoff or cycle)</shortdesc>
        </parameter>
        <parameter name="power_wait" unique="1">
                <getopt mixed="-T" />
                <content type="string" default="2"/>
                <shortdesc>Wait X seconds after on/off operation</shortdesc>
        </parameter>
        <parameter name="delay" unique="1">
                <getopt mixed="-f" />
                <content type="string" />
                <shortdesc>Wait X seconds before fencing is started</shortdesc>
        </parameter>
        <parameter name="verbose" unique="1">
                <getopt mixed="-v" />
                <content type="boolean" />
                <shortdesc>Verbose mode</shortdesc>
        </parameter>
</parameters>
<actions>
        <action name="on" />
        <action name="off" />
        <action name="reboot" />
        <action name="status" />
        <action name="diag" />
        <action name="list" />
        <action name="monitor" />
        <action name="metadata" />
</actions>
</resource-agent>
din care am crea un fragment de resursă STONITH care ar putea arăta aşa
Exemplu de Resursă STONITH
# crm crm(live)# cib new stonith
INFO: stonith shadow CIB created
crm(stonith)# configure primitive impi-fencing stonith::fence_ipmilan \
 params pcmk_host_list="pcmk-1 pcmk-2" ipaddr=10.0.0.1 login=testuser passwd=abc123 \
 op monitor interval="60s"
Și în sfârșit, din moment ce l-am dezactivat mai devreme, trebuie să reactivăm STONITH. În acest punct ar trebui să avem următoarea configurație.
crm(stonith)# configure property stonith-enabled="true"crm(stonith)# configure shownode pcmk-1
node pcmk-2
primitive WebData ocf:linbit:drbd \
    params drbd_resource="wwwdata" \
    op monitor interval="60s"
primitive WebFS ocf:heartbeat:Filesystem \
    params device="/dev/drbd/by-res/wwwdata" directory="/var/www/html" fstype="gfs2"
primitive WebSite ocf:heartbeat:apache \
    params configfile="/etc/httpd/conf/httpd.conf" \
    op monitor interval="1min"
primitive ClusterIP ocf:heartbeat:IPaddr2 \
    params ip="192.168.122.101" cidr_netmask="32" clusterip_hash="sourceip" \
    op monitor interval="30s"primitive ipmi-fencing stonith::fence_ipmilan \ params pcmk_host_list="pcmk-1 pcmk-2" ipaddr=10.0.0.1 login=testuser passwd=abc123 \ op monitor interval="60s"ms WebDataClone WebData \
    meta master-max="2" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
clone WebFSClone WebFS
clone WebIP ClusterIP \
    meta globally-unique="true" clone-max="2" clone-node-max="2"
clone WebSiteClone WebSite
colocation WebSite-with-WebFS inf: WebSiteClone WebFSClone
colocation fs_on_drbd inf: WebFSClone WebDataClone:Master
colocation website-with-ip inf: WebSiteClone WebIP
order WebFS-after-WebData inf: WebDataClone:promote WebFSClone:start
order WebSite-after-WebFS inf: WebFSClone WebSiteClone
order apache-after-ip inf: WebIP WebSiteClone
property $id="cib-bootstrap-options" \
    dc-version="1.1.5-bdd89e69ba545404d02445be1f3d72e6a203ba2f" \
    cluster-infrastructure="openais" \
    expected-quorum-votes="2" \
    stonith-enabled="true" \
    no-quorum-policy="ignore"
rsc_defaults $id="rsc-options" \
    resource-stickiness="100"
crm(stonith)# cib commit stonithINFO: commited 'stonith' shadow CIB to the cluster
crm(stonith)# quit
bye